Skip to Content

Using Baking Soda For Skin Before And After

Baking soda is an incredibly simple and affordable kitchen staple that can do wonders for your skin. If you want to know all about the baking soda benefits for your skin condition, and to see baking soda for skin before and after photos, keep on reading, to find out why you should be using baking soda as part of your skincare routine.

Using Baking Soda For Skin Before And After

What Are The Beauty Benefits of Baking Soda?

Baking soda is a fantastic kitchen ingredient with a variety of uses, especially in beauty routines.

Its properties make it an excellent addition to skincare, offering benefits such as exfoliation, pH balance, and more. Here’s how you can make the most of baking soda for your skin:

Exfoliation: Baking soda’s mildly abrasive nature allows it to gently remove dead skin cells, revealing brighter, fresher skin beneath.

To create an exfoliating scrub, mix a tablespoon of baking soda with water to form a baking soda solution paste and massage it onto your skin in circular motions.

Rinse thoroughly with water, and you’ll notice your skin feels smooth and revitalized.

Acne treatment: Baking soda’s antibacterial properties can help eliminate the bacteria responsible for causing acne.

Combine a teaspoon of baking soda with honey to form a thick paste and apply it to your problem areas.

Leave the paste on for no more than 15 minutes to avoid irritating your skin, then rinse with warm water. To achieve desired results, use this method two to three times a week.

Skin brightener: Baking soda can effectively remove dark and dull patches from your skin.

Make a mixture of baking soda and lemon juice, then massage it gently over the affected areas.

This combination helps exfoliate the top layer of your skin while the vitamin C in lemon juice inhibits melanin formation, the pigment responsible for skin darkening.

Hair growth: Baking soda might help stimulate hair growth by removing excess buildup and unclogging hair follicles.

Mix equal parts baking soda and water to create a solution and massage it into your scalp. Let it sit for 10 minutes and rinse with warm water.

Be careful not to dehydrate your hair follicles, as it might damage them.

Bubble bath: Adding a cup of baking soda to your bath can do wonders for your skin.

Its softening properties help soothe irritated or sensitive skin, while neutralizing body odor and maintaining the pH balance of your skin.

Soak in a baking soda bath for 15-20 minutes to reap its skin-soothing benefits.

The Magic Mix: Coconut Oil and Baking Soda for Skin Care

Mixing coconut oil and baking soda creates a DIY face scrub that may work wonders on your skin.

This combination brings together two powerful natural ingredients that help to cleanse, exfoliate, and nourish your skin.

To create the magic mix, just combine 2 tablespoons of coconut oil and 1 tablespoon of baking soda.

Stir these together until you get a creamy consistency. If needed, you can add a little warm water to make a thick paste.

This versatile scrub can be used in different ways according to your preference.

One way to use baking soda and coconut oil is as a facial scrub. Gently massage the paste onto your face in circular motions, paying attention to any problem areas.

After massaging for a few minutes, rinse your face with lukewarm water. This method helps remove dead skin cells, leaving your skin smooth and refreshed.

Another way to utilize this DIY baking soda concoction is as a face mask. For this method, apply the paste evenly over your face and leave it on for 10 to 15 minutes.

Afterward, rinse off the mask with lukewarm water. This approach may help reduce the appearance of acne and other skin rashes while providing nourishment to your skin.

Using this scrub in your skincare routine can help you benefit from the antimicrobial properties of coconut oil and the mild exfoliating effect of sodium bicarbonate (baking soda).

Just remember to perform a patch test before trying any new skincare product to ensure that it doesn’t cause any adverse reaction.

Remove Dead Skin Cells with Baking Soda

Exfoliate and Renew: Remove Dead Skin Cells with Baking Soda

Baking soda is an excellent exfoliator that can help you get rid of dead skin cells and rejuvenate your skin.

The fine granules of baking soda work as a gentle abrasive, making it effective in removing the top layer of dead skin cells without causing irritation, to exfoliate your skin.

To create a baking soda scrub for your skin, mix equal parts baking soda and water to form a paste.

You can also add a few drops of essential oil, such as tea tree oil, for added benefits.

However, make sure to patch test the mixture on a small area of your skin before applying it to your entire face to ensure no adverse reactions.

When applying the baking soda scrub to your face or body, use a gentle, circular motion to massage the mixture into your skin.

This helps in lifting and removing dead skin cells effectively. Remember not to press too hard, as it might cause minor abrasions.

For areas of your skin that are prone to calluses, such as feet, you may want to use a pumice stone in conjunction with the baking soda scrub for a more thorough exfoliation.

Regularly exfoliating with baking soda can help reduce the appearance of dark spots, scars, and help treat uneven skin tone.

As the baking soda scrub helps remove dead skin, it also allows skincare products to be more easily absorbed, making them more effective.

Moderation is key when it comes to exfoliation. For people with normal to oily skin, exfoliating with a baking soda scrub two to three times a week should be sufficient.

If you have sensitive or dry skin, it is recommended to limit exfoliation to once a week, as over-exfoliating may cause irritation and dryness.

Can Baking Soda Help with Acne and Dark Spots?

Baking soda can provide some relief for your acne breakouts due to its anti-inflammatory and antiseptic properties.

It may help soothe inflammation and mild pain, making it a useful addition to your current acne treatments.

However, be cautious when using baking soda on your skin, as it may irritate the skin and negatively affect its pH.

As for dark spots, baking soda serves as a good exfoliating agent. It helps remove dead skin cells and balances the pH level of your skin, which is essential for maintaining an even and clear skin tone.

To use baking soda for acne, mix a small amount with water to create a paste. Apply the paste directly to your pimple or acne-affected area.

Leave it on for a few minutes before rinsing it off with warm water. For optimal results, consider using a cotton ball to gently apply the paste to your skin.

To treat dark spots, mix baking soda with a few drops of water or lemon juice to create a paste.

Gently massage this mixture onto your dark spots for a couple of minutes, then rinse it off with warm water.

Repeat this process a few times a week to help even out your skin tone and lighten your dark spots.

Using Baking Soda For Skin Before And After

Baking soda is widely used as an excellent exfoliator, a remedy for acne, and even to soothe irritated skin.

When you decide to use baking soda on your skin, make sure you follow the appropriate steps for safe and effective results.

Begin by making a paste for applying to your face. Mix a teaspoon of baking soda with a small amount of water to create a smooth paste.

You can also add organic honey or coconut oil to enhance the paste’s soothing and moisturizing properties.

Next, thoroughly cleanse your face to remove dirt, oil, and any makeup.

Once the skin is clean, gently apply the mixture to the wet skin using circular motions, avoiding your eyes and any open wounds or irritated areas.

Focus on areas that usually have more oil or build-up, such as the T-zone.

Massage the paste into your skin for 2-3 minutes, taking care not to press too hard or irritate your skin.

You want to be gentle yet thorough to ensure the baking soda can effectively remove dead skin cells, excess oil, and other impurities.

After massaging the paste into your skin, let the mixture sit for 15-20 minutes. This will give the baking soda enough time to provide maximum benefits to your skin.

When the time is up, rinse the mixture off your face with cool water. Gently pat your skin dry with a clean towel, making sure not to rub the skin, as this can cause irritation.

As you use baking soda for skin care before and after, you can expect to see improvement in your skin’s texture and appearance.

The mild exfoliating action of the paste helps reveal fresh, glowing skin and provide a deep cleanse to unclog pores.

How To Wash Your Face With Baking Soda Face Wash

How To Wash Your Face With Baking Soda Face Wash

Prepare a baking soda face wash by mixing one teaspoon of baking soda with two teaspoons of warm water. This combination creates a paste that can be applied to your face as a facial cleanser.

Rinse your face with lukewarm water before applying the baking soda face wash.

This step helps remove any dirt, oil, or makeup from your skin, preparing it for the gentle exfoliation of the baking soda paste.

Using your fingers or a soft cloth, gently massage the baking soda paste onto your face using circular upward motions.

Be cautious around delicate areas, such as the eyes, to avoid irritation. Baking soda can help with skin issues, such as removing acne scars, skin rashes, and blackheads, making it a versatile natural cleanser.

After you have thoroughly massaged the baking soda paste onto your face, rinse it off with cool water.

Cool water not only soothes your skin from the exfoliation process but also helps to close up the pores.

If you are new to baking soda face wash or have sensitive skin, it’s a good idea to start with a patch test.

Apply the paste on a small section of your skin and wait for 24 hours to check if there is any irritation or adverse reaction. If you notice any redness or discomfort, discontinue its use.

To finish off your routine, gently pat your face dry using a clean towel, avoiding any harsh rubbing.

Follow up with a light moisturizer to keep your skin hydrated and nourished. Remember to use cool or cold water to rinse off your face as warm water may irritate the skin even more.

Crafting a Face Mask: Use Coconut Oil and Baking Soda

Simple ingredients, like combining coconut oil and baking soda, can create an effective face mask that addresses a variety of skin issues.

To make a simple mask, mix two tablespoons of baking soda and two tablespoons of coconut oil until they form a smooth paste.

This blend can help those with dry skin, as coconut oil acts as a natural moisturizer. Baking soda absorbs excess moisture and exfoliates the skin to reveal a glowing complexion.

When creating your face mask, make sure not to combine too much baking soda with your skin, as this can cause irritations.

Baking soda contains natural bleaching properties that contribute to achieving an even skin tone. However, applying too much can dehydrate your hair follicles. Use the mask in moderation to avoid any adverse effects.

To apply the baking soda face mask, start by cleaning your skin and removing any makeup or impurities.

Spread the baking soda and coconut oil mixture onto your face, avoiding the eye area. Let the mask sit for 10 to 15 minutes, allowing the ingredients to work their magic on your skin.

Baking soda not only absorbs excess oil but also acts as a natural deodorant, eliminating unpleasant odors. Meanwhile, coconut oil’s moisturizing properties help soothe and nourish dry skin.

After the time has elapsed, rinse your face gently with lukewarm water to remove the mask.

Be patient and thoroughly wash your face to ensure all the baking soda particles have been removed. Pat your skin dry with a clean towel, and admire the smoother complexion.

How to Soothe Ingrown Hair and Pores with Baking Soda

How to Soothe Ingrown Hair and Pores with Baking Soda

Baking soda is a versatile ingredient that can help soothe ingrown hairs and minimize the appearance of pores on your skin. Its exfoliating properties can assist in getting rid of dead skin cells and excess moisture, leaving your skin looking smoother and more refined.

To use baking soda for relieving ingrown hairs, you can create a simple solution by mixing equal parts of water and baking soda to make a paste.

Apply this mixture gently to your inflamed skin and let it sit for 5-10 minutes before rinsing it off with cold water.

This can help reduce redness and provide a soothing effect on the affected area. Remember to perform a patch test before applying it to your face, as some people may have sensitivities to baking soda.

As for minimizing the appearance of pores, you can use the same baking soda mixture.

It helps in absorbing excess oil that may contribute to the formation of clogged pores, which is beneficial for those with oily skin.

To do this, apply the paste to your face, focusing on areas where pores are more noticeable. Let it sit for a few minutes and rinse off with cold water. This process can be done once or twice a week for better results.

Using baking soda too often on your skin can cause dryness and irritation, so it’s important not to overdo it.

Also, avoid using undiluted baking soda directly on your skin as it can cause a burning sensation.



Baking soda is an incredibly simple and affordable kitchen staple that can do wonders for your skin.

Baking soda can be used as a gentle exfoliator to remove dead skin cells and reveal brighter skin beneath. It may also help with acne, dark spots, and hair growth.

A mixture of baking soda and coconut oil yields a DIY face scrub that can gently cleanse the skin while providing nourishment at the same time.

Likewise, creating a paste from baking soda and water can help soothe ingrown hairs and minimize pores on your face. Just remember not to use too much baking soda on your skin as it may cause irritation or dryness.

All products featured on Gemma Etc. are PR samples or gifted items, unless otherwise indicated. This post may contain affiliate links. If you wish to find out more, please see my Disclaimer within my navigation bar.